Cut the AC Power Cord: Portable LED Worklights Built for Nighttime Work

Battery-powered, app-controlled, and tough enough for the worst weather your crew can throw at it.

Anyone who has worked a night shift knows the routine. Drag out the generator. Run cords across the site. Listen to the engine drone for hours, refuel it at 2 a.m., and breathe the exhaust the whole time. Traditional jobsite lighting is loud, heavy, and tethered to a fuel supply — and it usually shows up exactly where you don't want it.

EnviroLux Portable LED Worklights are built to retire that routine. Each unit is a lightweight, weather-sealed LED fixture that pairs with an Anker portable power station for a completely cord-free setup. No generator. No fumes. No tripping hazards snaking across the ground. Just bright, even, professional-grade light that sets up in seconds and runs all night.

Brilliant Light, Remarkable Efficiency

The headline number is 201 lumens per watt — industry-leading efficiency that turns a modest battery into a long night of work light. Efficiency isn't just a spec-sheet brag here; it's what makes battery operation practical in the first place. The more light you get per watt, the longer a single charge lasts and the smaller the power station you need to carry.

That efficiency translates directly into up to 8 hours of runtime on a single charge, with crisp 5000K bright white output and a CRI of 80+ so colors, labels, and hazards read true under the light. Whether you're framing a building, patching a roadway, or staging an emergency response, you get clean illumination that lasts through the shift.

Control the Whole Jobsite From Your Phone

Every worklight connects to the EnviroLux custom app over wireless (Bluetooth/Wi-Fi), and that changes how you light a site. Instead of walking to each fixture, you manage everything from your smartphone:

• Full dimming control — raise or lower brightness from anywhere on the jobsite without interrupting the work.
• Programmable wattage — run high output for short, detail-heavy tasks, or dial it down for extended low-level illumination that stretches battery life across the whole night.
• Group management & preset scenes — control multiple lights at once and save setups for different jobsite requirements.
• Battery monitoring — keep an eye on remaining runtime so a dead light never surprises you mid-task.

The practical upside is real flexibility. A crew can flood an area with light during setup, then taper output to conserve power once the heavy work is done — all without anyone climbing a ladder or hunting for a switch.

Sealed Tight, Built to Take a Beating

Portable gear lives a hard life. It gets dropped, rained on, kicked across gravel, and left out overnight. EnviroLux worklights are engineered for exactly that.

The high-impact fiberglass housing resists physical abuse, and our poured-in-place gasket technology creates a permanent, airtight seal — not a press-fit rubber strip that loosens over time. Moisture and chemicals stay out for the life of the fixture. The result is a fixture rated IP65, IP66, and IP67 for ingress protection and NEMA 4X for demanding outdoor and wet environments. Rain, dust, washdown, jobsite chemicals — the light keeps working.

And because the work doesn't always happen in neutral colors, the housings are available in Red, Blue, Green, Black, and Yellow, with custom colors available for fleet branding or crew identification.

Powered by Anker Portable Power Stations

The cord-free magic comes from pairing each worklight with an Anker portable power station. EnviroLux worklights are designed to run cleanly off Anker's lineup, so you can size the battery to the job — a compact unit for a quick repair, or a 2,000+ Wh station for an all-night operation.

For professional daily use, we recommend the LiFePO4 (LFP) models. They deliver superior cycle life and carry a 5-year warranty. The MCN (Nickel Manganese Cobalt) models are a cost-effective option with an 18-month warranty for lighter-duty needs.

Quick battery recharge means your power station is ready for the next nighttime project with minimal downtime — charge during the day, light through the night.

Where These Lights Earn Their Keep

Because they're portable, sealed, and silent, EnviroLux worklights go places a generator-and-cord rig simply can't:

• Nighttime construction — bright, even coverage for framing, concrete, and finish work after dark.
• Roadwork & infrastructure — rugged light for lane closures, paving, and utility crews where setup speed matters.
• Emergency response — instant, fuel-free illumination for first responders and disaster recovery, with no engine noise to talk over.
• Outdoor projects & events — anywhere you need professional light without running power to it.

Certified, Compliant, and American-Made

EnviroLux worklights are 100% Made in the USA at our Texas facility — not assembled here from imported parts, but built here. That matters for federal, state, and infrastructure projects with domestic-sourcing requirements. Every unit is BAA and BABA compliant and NSF Certified, so they qualify where it counts and meet the standards your specifications demand.

201 LM/W IP65 / IP66 / IP67 NEMA 4X CRI 80+ NSF CERTIFIED BAA COMPLIANT BABA COMPLIANT MADE IN USA

Ready to Light Up Your Nighttime Projects?

Sales, orders, quotes, and project support — let's spec the right setup for your crew.

(800) 914-8779

service@envirolux.com  •  www.envirolux.com