180 Watt Knight Guard Less Than 2 Percent Blue Light Area Light

Product Description

The EnviroLux Large Slimline area light with new Knight Guard Technology is designed to produce less than 2 percent blue light and to specifically to replace incumbent Low Pressure Sodium light sources and produce higher efficiency than Amber light sources Typical area lighting applications include retail centers, industrial parks, airports, and office buildings, close to observatories and beaches where less than 2 percent blue light for environmental lighting codes apply. Mounting heights of 24 to 40 feet can be used based on light level and uniformity requirements.

The 180-Watt Knigh Guard LED Area Flood Light is available with a wide choice of mounting configurations and optical distributions designed to replace HID lighting systems up to 400w.

This product is compliant in areas close to beaches where environmental lighting codes apply.

The typical commercial applications for this product include:

• Retail centers
• Industrial parks
• Airports
• Office buildings

Mounting heights of 14 to 25 feet can be used based on light level and uniformity requirements.

Specifications and Features

Housing 

Die-Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. 

Finish 

Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. 

Lens 

Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. 

Mounting Options 

Mounts with Stealth Arm, Adjustable Slipfitter, 2 3 /8˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed).

Envirolux LED Engine 

Knight Guard Technology - Less Than 2 Percent Blue Light, 150 LPW, Aluminum Metal Core Boards With 2oz Copper Inlay.

Wattage 

180W=Array: 180 System Watts: Lumens: 27,000 

Driver 

Programmable Driver, 120-277V, 50/60Hz; Dimmable Driver.

Listing & Ratings 

CSA Listed for Wet Locations. Operating Temperatures: -40°C to + 50°C IP67 Sealed LED Compartment. 

Environmental Impact

For millions of years, female sea turtles have come ashore to lay their eggs on beaches. When the eggs hatched, the hatchling turtles were guided to the ocean.

They were led by an instinct to travel away from the dark silhouettes of the dune vegetation and toward the brightest horizon, which was the light from the sky reflecting off the ocean.

However, many coastal areas have become highly populated, and artificial lights have been added near the beaches. This artificial light deters female sea turtles from nesting and disorients hatchling sea turtles.

Rather than traveling towards the sea, the hatchlings travel inland toward the artificial lights. This causes them to die from dehydration, be preyed upon by fire ants and ghost crabs, or even get run over by cars on the road.

This disorientation from artificial lights has led to thousands of hatchling deaths in the state of Florida each year. It has also created a significant marine turtle conservation problem.

Statewide efforts have gathered information from disorientation reports and have used this to facilitate light management on nesting beaches and to research additional remedies for light-related threats.

Historically, low-pressure sodium-vapor (LPS) lighting has been used to deter sea turtles away from beaches. Since LPS sources are monochromatic, they give poor color rendition and utilize high amounts of energy.

In an effort to convert to LED while maintaining Florida’s guidelines for proper light wavelengths, NASA sought out EnviroLux Energy Systems to develop less than 2 percent blue light LED solutions.

This solution would improve the quality of light without harming sea turtle migration and enable the management of thousands of fixtures through a wireless cloud for optimum energy savings.

For the past 28 years, EnviroLux Energy Systems has been a leader in energy-efficient lighting.